01Status of this designation
No successor is recorded for M83461/2-902. The AS568-902 geometry is still standard, so a part can be supplied to that size in the compound your service needs — but the drawing has to be changed to say so. Send us the drawing and the service conditions and we will propose a compound.
| Designation | M83461/2-902 |
| Status | Canceled |
| Current designation | — |
| Governing document | MIL-P-83461/2 |
| Compound | NBR |
| Size (AS568) | -902 · 0.239 × 0.064 in · 6.07 × 1.63 mm |
| Backup ring required | see drawing |
| Superseded | 2010 |
Status compiled from public catalogue data. Where the part is under configuration control, confirm the revision against the current ASSIST record before changing a drawing or accepting a shipment.
02Variants of this family at the same size
1 on recordThe suffix after M83461 identifies a different compound or a different specification within the same family. They share the 0.239 × 0.064 in geometry and nothing else.
| Designator | Status | Order as |
|---|---|---|
| M83461/2-902 | Canceled | — |
03Other families for AS568-902
2 alternatives, different compounds| Designator | Compound | Status | Order as |
|---|---|---|---|
| AS3208-02 | FKM | Stabilized | AS3208A |
| MS29512-02 | NBR | Canceled | AS29512C |
Do not cross materials on your own. A dash number fixes geometry only. Substituting an FKM part where the drawing calls for nitrile changes the swell behaviour in oil and the compression set at temperature — it will fit, and it may still fail the qualification.