01All 15 compounds by upper limit
| Code | Name | Min °C | Max °C | Principal media |
|---|---|---|---|---|
| NR | Natural rubber | -50 | 70 | the compound sheet governs |
| AU/EU | Polyurethane | -40 | 82 | abrasion and high pressure |
| NBR | Buna-N | -34 | 100 | mineral oils, hydraulic fluid |
| SBR | SBR | -46 | 100 | the compound sheet governs |
| IIR | Butyl | -59 | 121 | gas impermeability, brake fluid and phosphate esters; never oil |
| ECO | Epichlorohydrin | -40 | 135 | the compound sheet governs |
| HNBR | Hydrogenated NBR | -32 | 149 | oil with heat |
| AEM | Ethylene-acrylic | -40 | 149 | hot automotive oil |
| EPDM | EPDM | -57 | 150 | water, steam, glycol; never petroleum oils |
| FVMQ | Fluorosilicone | -73 | 177 | fuels at low temperature |
| ACM | Polyacrylate | -21 | 177 | hot transmission oil; poor at low temperature and in water |
| FKM | Fluorocarbon | -26 | 204 | fuels, oils, heat |
| VMQ | Silicone | -54 | 204 | dry heat and cold, static service |
| FEPM | TFE/P copolymer | -9 | 232 | steam, amines, sour gas |
| FFKM | Perfluoroelastomer | -26 | 320 | aggressive chemistry and temperature beyond FKM |
02The four that cover most enquiries
NBR — the default
Mineral oil, hydraulic fluid, grease, air, water below 100 °C. Cheap, available everywhere, and wrong for ketones, esters, ozone and anything above about 120 °C continuous.
FKM — the heat answer
Fuels, oils and 200 °C. Fails in ketones, esters, ammonia and steam. Costs roughly four times NBR, which is why it is specified rather than defaulted to.
EPDM — water and steam
Hot water, steam, glycol, brake fluid, ozone and weather. Destroyed by petroleum oils and solvents — the single most common material mix-up in maintenance.
VMQ — cold and dry heat
−54 to 204 °C in static service, excellent low-temperature flexibility, poor tear strength and poor in most fuels. FVMQ exists for fuel at low temperature.
03What we need to recommend one
| Continuous temperature | The steady-state figure, not the peak on the label. |
| Peak temperature and duration | How hot, how long, how often. |
| Medium | The actual fluid, including any additive package or cleaning agent. |
| Pressure and motion | Static or dynamic, and whether a backup ring is in the groove. |
| Qualification | Any standard the part must be certified to, and who audits it. |