01Service temperature band
-26
204
−80 °C0100200340 °C
Continuous service band in solid. Excursions above 204 °C are tolerated for short periods only if the compound is specified for it — ask before designing to the edge.
02Principal media
| Will handle | fuels, oils, heat |
| Will not handle | See the comparison table below — the compounds immediately adjacent in the list are usually the right answer for media that attack FKM. |
| Service band | -26 … 204 °C |
| Sizes | All 369 AS568 dash numbers, metric on request |
03FKM in the AS568 table
same geometry, different materialEvery AS568 size is moulded in FKM. The dash number stays the same — only the compound code changes on the order line.
All 369 sizes
04All 15 compounds
sorted by upper service limit| Code | Name | Min °C | Max °C | Principal media |
|---|---|---|---|---|
| NR | Natural rubber | -50 | 70 | the compound sheet governs |
| AU/EU | Polyurethane | -40 | 82 | abrasion and high pressure |
| NBR | Buna-N | -34 | 100 | mineral oils, hydraulic fluid |
| SBR | SBR | -46 | 100 | the compound sheet governs |
| IIR | Butyl | -59 | 121 | gas impermeability, brake fluid and phosphate esters; never oil |
| ECO | Epichlorohydrin | -40 | 135 | the compound sheet governs |
| HNBR | Hydrogenated NBR | -32 | 149 | oil with heat |
| AEM | Ethylene-acrylic | -40 | 149 | hot automotive oil |
| EPDM | EPDM | -57 | 150 | water, steam, glycol; never petroleum oils |
| FVMQ | Fluorosilicone | -73 | 177 | fuels at low temperature |
| ACM | Polyacrylate | -21 | 177 | hot transmission oil; poor at low temperature and in water |
| FKM ← | Fluorocarbon | -26 | 204 | fuels, oils, heat |
| VMQ | Silicone | -54 | 204 | dry heat and cold, static service |
| FEPM | TFE/P copolymer | -9 | 232 | steam, amines, sour gas |
| FFKM | Perfluoroelastomer | -26 | 320 | aggressive chemistry and temperature beyond FKM |