01Status of this designation
No successor is recorded for M83461/2-914. The AS568-914 geometry is still standard, so a part can be supplied to that size in the compound your service needs — but the drawing has to be changed to say so. Send us the drawing and the service conditions and we will propose a compound.
| Designation | M83461/2-914 |
| Status | Canceled |
| Current designation | — |
| Governing document | MIL-P-83461/2 |
| Compound | NBR |
| Size (AS568) | -914 · 1.047 × 0.116 in · 26.59 × 2.95 mm |
| Backup ring required | see drawing |
| Superseded | 2010 |
Status compiled from public catalogue data. Where the part is under configuration control, confirm the revision against the current ASSIST record before changing a drawing or accepting a shipment.
02Variants of this family at the same size
1 on recordThe suffix after M83461 identifies a different compound or a different specification within the same family. They share the 1.047 × 0.116 in geometry and nothing else.
| Designator | Status | Order as |
|---|---|---|
| M83461/2-914 | Canceled | — |
03Other families for AS568-914
2 alternatives, different compounds| Designator | Compound | Status | Order as |
|---|---|---|---|
| AS3208-14 | FKM | Stabilized | AS3208A |
| MS29512-14 | NBR | Canceled | AS29512C |
Do not cross materials on your own. A dash number fixes geometry only. Substituting an FKM part where the drawing calls for nitrile changes the swell behaviour in oil and the compression set at temperature — it will fit, and it may still fail the qualification.