AS568 · ISO 3601 · MIL-PRF cross-references, 15 compounds
M83461 · NBR · 1.355 × 0.116 in

M83461/2-918

This designation was cancelled with no replacement on record. There is no successor designation in the data we hold — the geometry still exists as AS568-918, so the practical route is to buy the size, not the designator.

StatusCanceled
Order as—
CompoundNBR
ID1.355× 0.116 in

01Status of this designation

Cancelled, no replacement listed

No successor is recorded for M83461/2-918. The AS568-918 geometry is still standard, so a part can be supplied to that size in the compound your service needs — but the drawing has to be changed to say so. Send us the drawing and the service conditions and we will propose a compound.

DesignationM83461/2-918
StatusCanceled
Current designation—
Governing documentMIL-P-83461/2
CompoundNBR
Size (AS568)-918 · 1.355 × 0.116 in · 34.42 × 2.95 mm
Backup ring requiredsee drawing
Superseded2010

Status compiled from public catalogue data. Where the part is under configuration control, confirm the revision against the current ASSIST record before changing a drawing or accepting a shipment.

02Variants of this family at the same size

1 on record

The suffix after M83461 identifies a different compound or a different specification within the same family. They share the 1.355 × 0.116 in geometry and nothing else.

DesignatorStatusOrder as
M83461/2-918Canceled—

03Other families for AS568-918

2 alternatives, different compounds
DesignatorCompoundStatusOrder as
AS3208-18FKMStabilizedAS3208A
MS29512-18NBRCanceledAS29512C

Do not cross materials on your own. A dash number fixes geometry only. Substituting an FKM part where the drawing calls for nitrile changes the swell behaviour in oil and the compression set at temperature — it will fit, and it may still fail the qualification.

04Nearby sizes in M83461

All 366 M83461 parts